China Ss303 Stainless Steel Precision Grinding Round Bar shaft collar axial load calculation

Merchandise Description

STAINLESS Steel BAR/ROD/SHAFT
one.We provides stainless metal very hot-rolled bar, cold-drawn brilliant spherical bar, chilly-drawn grinding round bar skillfully in accordance with the grades of 301,303,304,304L,305,309,309S,310,310S,316,316L,317,321,410,416,420,420F,430,430F,431,440A,440C,440F,9Cr18,9Cr18Mo etc. Duplex stainless steel 2205 and warmth resistant steel SUH35(21-4N) ,Tremendous alloy Inconel601,625,718,X-750 etc.

2.These goods are widely supplied to the areas of Pneumatic parts and producing, autos, ships, chemical substances, food equipment, pharmaceutical machinery and so forth.

three.Large-course engineering ,effectively-content material services ,in pursuit of the identical worth with buyers, we will be your most creditable stainless steel manufacturer.

three hundred Collection STAINLESS Metal

Grade(JIS)	Composition nominal wt%
Grade(JIS)	C	Mn	P	S	Si	Cr	Ni	Mo	Ti
301	≤0.15	≤2	≤0.045	≤0.03	≤0.seventy five	16-eighteen	6-8
302	≤0.fifteen	≤2	≤0.045	≤0.03	≤0.75	17-19	eight-10
303	≤0.15	≤2	≤0.045	≤0.03	≤0.seventy five	17-19	eight-10
304	≤0.08	≤2	≤0.045	≤0.03	≤0.seventy five	18-20	8-10.5
304L	≤0.03	≤2	≤0.045	≤0.03	≤0.75	18-twenty	8-12
305	≤0.12	≤2	≤0.045	≤0.03	≤0.75	17-19	ten.5-thirteen
309	≤0.2	≤2	≤0.045	≤0.03	≤0.75	22-24	12-15
309S	≤0.08	≤2	≤0.045	≤0.03	≤0.seventy five	22-24	12-15
310	≤0.25	≤2	≤0.045	≤0.03	≤1.five	24-26	19-22
310S	≤0.08	≤2	≤0.045	≤0.03	≤1.five	24-26	19-22
316	≤0.08	≤2	≤0.045	≤0.03	≤0.75	16-eighteen	ten-14	2-three
316L	≤0.03	≤2	≤0.045	≤0.03	≤0.seventy five	sixteen-eighteen	10-14	2-three
316Ti	≤0.08	≤2	≤0.045	≤0.03	≤0.75	16-eighteen	10-fourteen	2-three	5C-.7
317	≤0.08	≤2	≤0.045	≤0.03	≤0.75	18-twenty	11-fifteen	three-4
321	≤0.09	≤2	≤0.045	≤0.03	≤0.seventy five	seventeen-19	9-12		5C-.seven

400 Sequence STAINLESS Steel

Grade(JIS)	Composition nominal wt%
Grade(JIS)	C	Mn	P	S	Si	Cr	Ni	Mo
410(1Cr13)	≤0.15	≤1	≤0.045	≤0.03	≤1	11.5-thirteen.5
410L(00CR12)	≤0.03	≤1	≤0.045	≤0.03	≤1	eleven.-13.
416(Y1Cr13)	≤0.15	≤1.twenty five	≤0.045	≥0.15	≤1	12-14		.6
420J1(2Cr13)	.16-.25	≤1	≤0.045	≤0.03	≤1	12-fourteen
420J2(3Cr13)	.26-.35	≤1	≤0.045	≤0.03	≤1	twelve-14
420F(Y3Cr13)	.26-.4	≤1.twenty five	≤0.045	≥0.15	≤1	twelve-fourteen
430(1Cr17)	≤0.12	≤1.25	≤0.045	≤0.03	≤0.seventy five	16-eighteen
430F(Y1Cr17)	≤0.12	≤1.	≤0.045	≥0.fifteen	≤1.	sixteen-18
431(1Cr17Ni2)	.11-.seventeen	≤0.eight	≤0.045	≤0.03	≤0.8	16-eighteen	one.5-2.five
440A(7Cr17)	.6-.75	≤1	≤0.045	≤0.03	≤1	16-18		.75
440C(11Cr17)	.ninety five-1.two	≤1	≤0.045	≤0.03	≤1	sixteen-18
440F(Y11Cr17)	.ninety five-1.2	≤1.twenty five	≤0.045	≥0.15	≤1	sixteen-18
9Cr18	.9-1.	≤0.eight	≤0.045	≤0.03	≤0.eight	seventeen-19
9Cr18Mo	.ninety five-1.1	≤0.eight	≤0.045	≤0.03	≤0.eight	sixteen-eighteen		.4-.seven
9Cr18MoV	.eighty five-.ninety five	≤0.eight	≤0.045	≤0.03	≤0.eight	17-19		1.-1.3

Content SPECIFICATION

Business	HangZhou CZPT Precision Machinery Co.,Ltd
Substance	Stainless Steel
Regular	ASTM, AISI, GB, DIN, JIS, EN
Finish	cold-drawn,cold rolled, hot rolled
Diameter	5mm~120mm
Length	100mm~6000mm
Area	Black, Polished Brilliant, Grinding
Floor Roughness	Polished Bar Ra0.8 Grinding Bar Ra0.two
Tolerance	Polished Bar Tolerance :~-.1mm Grinding Bar Tolerance: g6 / f7
Straightness	Grinding Bar Straightness :12mm/1000mm
Bundle	Standard Export Packages
Container Measurement	20ft GP:5898mm(Size)x2352mm(Width)x2393mm(Higher) 40ft GP:12032mm(Size)x2352mm(Width)x2393mm(Substantial)
MTC	Mill Test Certificate Or 3rd Part Inspection
Price tag Item	EX-Work,FOB,CIF
Payment	T/T
Shipping Time	within 30 days from confirmed order
MOQ	100KG

Manufacturing facility Demonstrate

Product Show

With the aid of our team of authorities, our business acknowledged as a leading Exporter & Manufacturer of Common Stainless Steel Shafts in HangZhou, ZheJiang , China.
The Stainless Metal shafts are fabricated utilizing ideal good quality stainless steel and most recent machinery. The shafts endure rigorous processes like pilling, straightening, grinding, sharpening and finishing underneath the supervision of skilled engineers.
Diverse from Challenging Chrome Plated Bars produced by carbon metal, Stainless Steel shafts are made by Stainless Metal SUS304 or SUS303 with not tough chrome plated. Stainless Steel shafts have the excellent corrosion resistance efficiency as well as stainless steel. They are certified beneath the situation of acidic, alkaline or higher-temperature setting or cleansing and sanitation condition these kinds of as foodstuff processing machinery.
About HangZhou CZPT Precision Machinery Co., Ltd. :-
Recognized in 2009 , HangZhou CZPT Precision Equipment Co., Ltd. has created a name for itself in the record of top suppliers of Shafts & Shaft Collars in China. The supplier business is found in HangZhou, ZheJiang and is 1 of the leading sellers of listed items.
HangZhou CZPT Precision Equipment Co., Ltd. is detailed in Trade India’s record of verified sellers supplying supreme top quality of Sus 304/303 Stainless Steel Shafts ,Linear Bearing Shaft Rod with Bearing Support Seats ,Piston Rods And Linear Shafts and so on. Buy Shafts & Shaft Collars in bulk from us for the greatest top quality products and services.

If you are fascinated in our business, you should really feel free to make contact with us:

HangZhou CZPT PRECISION Equipment CO., LTD
Incorporate: No.217 CZPT Developing, No.668 Fengting Street, HangZhou Industrial Park P.R.C

US $3-4
/ kg
| 100 kg

(Min. Order)

###

Type:	Stainless Steel Bars
Standard:	ASTM, AISI, GB, JIS, DIN
Grade:	300 Series
Certification:	ISO, ISO9001
Shape:	Round
Technique:	Hot Rolled

###

Samples:	US$ 1/kg 1 kg(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Grade(JIS)	Composition nominal wt%
Grade(JIS)	C	Mn	P	S	Si	Cr	Ni	Mo	Ti
301	≤0.15	≤2	≤0.045	≤0.03	≤0.75	16-18	6-8
302	≤0.15	≤2	≤0.045	≤0.03	≤0.75	17-19	8-10
303	≤0.15	≤2	≤0.045	≤0.03	≤0.75	17-19	8-10
304	≤0.08	≤2	≤0.045	≤0.03	≤0.75	18-20	8-10.5
304L	≤0.03	≤2	≤0.045	≤0.03	≤0.75	18-20	8-12
305	≤0.12	≤2	≤0.045	≤0.03	≤0.75	17-19	10.5-13
309	≤0.2	≤2	≤0.045	≤0.03	≤0.75	22-24	12-15
309S	≤0.08	≤2	≤0.045	≤0.03	≤0.75	22-24	12-15
310	≤0.25	≤2	≤0.045	≤0.03	≤1.5	24-26	19-22
310S	≤0.08	≤2	≤0.045	≤0.03	≤1.5	24-26	19-22
316	≤0.08	≤2	≤0.045	≤0.03	≤0.75	16-18	10-14	2-3
316L	≤0.03	≤2	≤0.045	≤0.03	≤0.75	16-18	10-14	2-3
316Ti	≤0.08	≤2	≤0.045	≤0.03	≤0.75	16-18	10-14	2-3	5C-0.7
317	≤0.08	≤2	≤0.045	≤0.03	≤0.75	18-20	11-15	3-4
321	≤0.09	≤2	≤0.045	≤0.03	≤0.75	17-19	9-12		5C-0.7

###

Grade(JIS)	Composition nominal wt%
Grade(JIS)	C	Mn	P	S	Si	Cr	Ni	Mo
410(1Cr13)	≤0.15	≤1	≤0.045	≤0.03	≤1	11.5-13.5
410L(00CR12)	≤0.03	≤1	≤0.045	≤0.03	≤1	11.0-13.0
416(Y1Cr13)	≤0.15	≤1.25	≤0.045	≥0.15	≤1	12-14		0.6
420J1(2Cr13)	0.16-0.25	≤1	≤0.045	≤0.03	≤1	12-14
420J2(3Cr13)	0.26-0.35	≤1	≤0.045	≤0.03	≤1	12-14
420F(Y3Cr13)	0.26-0.4	≤1.25	≤0.045	≥0.15	≤1	12-14
430(1Cr17)	≤0.12	≤1.25	≤0.045	≤0.03	≤0.75	16-18
430F(Y1Cr17)	≤0.12	≤1.0	≤0.045	≥0.15	≤1.0	16-18
431(1Cr17Ni2)	0.11-0.17	≤0.8	≤0.045	≤0.03	≤0.8	16-18	1.5-2.5
440A(7Cr17)	0.6-0.75	≤1	≤0.045	≤0.03	≤1	16-18		0.75
440C(11Cr17)	0.95-1.2	≤1	≤0.045	≤0.03	≤1	16-18
440F(Y11Cr17)	0.95-1.2	≤1.25	≤0.045	≥0.15	≤1	16-18
9Cr18	0.9-1.0	≤0.8	≤0.045	≤0.03	≤0.8	17-19
9Cr18Mo	0.95-1.1	≤0.8	≤0.045	≤0.03	≤0.8	16-18		0.4-0.7
9Cr18MoV	0.85-0.95	≤0.8	≤0.045	≤0.03	≤0.8	17-19		1.0-1.3

###

Company	Suzhou Weipeng Precision Machinery Co.,Ltd
Material	Stainless Steel
Standard	ASTM, AISI, GB, DIN, JIS, EN
Finish	cold-drawn,cold rolled, hot rolled
Diameter	5mm~120mm
Length	100mm~6000mm
Surface	Black, Polished Bright, Grinding
Surface Roughness	Polished Bar Ra0.8; Grinding Bar Ra0.2
Tolerance	Polished Bar Tolerance :0~-0.1mm; Grinding Bar Tolerance: g6 / f7
Straightness	Grinding Bar Straightness :12mm/1000mm
Package	Standard Export Packages
Container Size	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
MTC	Mill Test Certificate Or Third Part Inspection
Price Item	EX-Work,FOB,CIF
Payment	T/T
Delivery Time	within 30 days from confirmed order
MOQ	100KG

US $3-4
/ kg
| 100 kg

(Min. Order)

###

Type:	Stainless Steel Bars
Standard:	ASTM, AISI, GB, JIS, DIN
Grade:	300 Series
Certification:	ISO, ISO9001
Shape:	Round
Technique:	Hot Rolled

###

Samples:	US$ 1/kg 1 kg(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Grade(JIS)	Composition nominal wt%
Grade(JIS)	C	Mn	P	S	Si	Cr	Ni	Mo	Ti
301	≤0.15	≤2	≤0.045	≤0.03	≤0.75	16-18	6-8
302	≤0.15	≤2	≤0.045	≤0.03	≤0.75	17-19	8-10
303	≤0.15	≤2	≤0.045	≤0.03	≤0.75	17-19	8-10
304	≤0.08	≤2	≤0.045	≤0.03	≤0.75	18-20	8-10.5
304L	≤0.03	≤2	≤0.045	≤0.03	≤0.75	18-20	8-12
305	≤0.12	≤2	≤0.045	≤0.03	≤0.75	17-19	10.5-13
309	≤0.2	≤2	≤0.045	≤0.03	≤0.75	22-24	12-15
309S	≤0.08	≤2	≤0.045	≤0.03	≤0.75	22-24	12-15
310	≤0.25	≤2	≤0.045	≤0.03	≤1.5	24-26	19-22
310S	≤0.08	≤2	≤0.045	≤0.03	≤1.5	24-26	19-22
316	≤0.08	≤2	≤0.045	≤0.03	≤0.75	16-18	10-14	2-3
316L	≤0.03	≤2	≤0.045	≤0.03	≤0.75	16-18	10-14	2-3
316Ti	≤0.08	≤2	≤0.045	≤0.03	≤0.75	16-18	10-14	2-3	5C-0.7
317	≤0.08	≤2	≤0.045	≤0.03	≤0.75	18-20	11-15	3-4
321	≤0.09	≤2	≤0.045	≤0.03	≤0.75	17-19	9-12		5C-0.7

###

Grade(JIS)	Composition nominal wt%
Grade(JIS)	C	Mn	P	S	Si	Cr	Ni	Mo
410(1Cr13)	≤0.15	≤1	≤0.045	≤0.03	≤1	11.5-13.5
410L(00CR12)	≤0.03	≤1	≤0.045	≤0.03	≤1	11.0-13.0
416(Y1Cr13)	≤0.15	≤1.25	≤0.045	≥0.15	≤1	12-14		0.6
420J1(2Cr13)	0.16-0.25	≤1	≤0.045	≤0.03	≤1	12-14
420J2(3Cr13)	0.26-0.35	≤1	≤0.045	≤0.03	≤1	12-14
420F(Y3Cr13)	0.26-0.4	≤1.25	≤0.045	≥0.15	≤1	12-14
430(1Cr17)	≤0.12	≤1.25	≤0.045	≤0.03	≤0.75	16-18
430F(Y1Cr17)	≤0.12	≤1.0	≤0.045	≥0.15	≤1.0	16-18
431(1Cr17Ni2)	0.11-0.17	≤0.8	≤0.045	≤0.03	≤0.8	16-18	1.5-2.5
440A(7Cr17)	0.6-0.75	≤1	≤0.045	≤0.03	≤1	16-18		0.75
440C(11Cr17)	0.95-1.2	≤1	≤0.045	≤0.03	≤1	16-18
440F(Y11Cr17)	0.95-1.2	≤1.25	≤0.045	≥0.15	≤1	16-18
9Cr18	0.9-1.0	≤0.8	≤0.045	≤0.03	≤0.8	17-19
9Cr18Mo	0.95-1.1	≤0.8	≤0.045	≤0.03	≤0.8	16-18		0.4-0.7
9Cr18MoV	0.85-0.95	≤0.8	≤0.045	≤0.03	≤0.8	17-19		1.0-1.3

###

Company	Suzhou Weipeng Precision Machinery Co.,Ltd
Material	Stainless Steel
Standard	ASTM, AISI, GB, DIN, JIS, EN
Finish	cold-drawn,cold rolled, hot rolled
Diameter	5mm~120mm
Length	100mm~6000mm
Surface	Black, Polished Bright, Grinding
Surface Roughness	Polished Bar Ra0.8; Grinding Bar Ra0.2
Tolerance	Polished Bar Tolerance :0~-0.1mm; Grinding Bar Tolerance: g6 / f7
Straightness	Grinding Bar Straightness :12mm/1000mm
Package	Standard Export Packages
Container Size	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
MTC	Mill Test Certificate Or Third Part Inspection
Price Item	EX-Work,FOB,CIF
Payment	T/T
Delivery Time	within 30 days from confirmed order
MOQ	100KG

Types of Shaft Collars

Clamp style shaft collars

A variety of styles of shaft collars are available for your machining needs. Clamp style shaft collars offer better flexibility and hold better than set screw collars. They are best for shaft materials that are softer than a setscrew. Clamp style collars are generally easier to maneuver, as they are two-piece and are hinged along the shaft.
Clamp style shaft collars come in two-piece and one-piece designs. One-piece clamp collars are typically used for a single-piece shaft, while two-piece clamp collars are used for multiple shafts. The one-piece clamp collar provides a more uniform holding force, while two-piece clamp collars provide more clamping force and can be installed anywhere on the shaft. Both styles are available in English and metric measurements.
The holding power of Clamp style shaft collars depends on their bore size and concentricity. The fastening hardware also affects torque transmission. Forged screws are generally stronger than broached screws, and are less likely to ream out. However, you still need to make sure that the material of the collar is strong enough to withstand the recommended screw torque.
Clamp style shaft collars are available in 1215 lead-free steel with a black oxide finish and zinc plating, as well as 303 and 316 stainless steel. They are also available in 2024 aluminum with an anodized finish. They are available in a range of sizes from 1/8” to six inches and 3mm to 150mm.
One of the main benefits of Clamp style shaft collars is their versatility. The collars can be used as guides, spacers, or stops on a variety of medical equipment. They are designed to distribute compression forces around a shaft, and they can be added at any stage in the manufacturing process.

Set screw shaft collars

Set screw shaft collars are used to secure screws to shafts. They can be purchased in a variety of sizes. The external diameter, internal diameter, and width of the collar will determine the proper collar size. Some companies also offer custom and adjustable-width collars. Clamp-style shaft collars are easier to maintain, and distribute torque evenly across the shaft. They also offer twice the holding power of set screw collars.
Collars are available in metric and inch sizes. They are also available in zinc plated and black-oxide steel. In addition, they come in a variety of styles. Whether you’re looking for a custom collar, or something a little more conventional, you can find it with the help of an ISO-certified supplier.
Set screw shaft collars come in different sizes and materials. Socket collars, for example, are made of steel and have an inside diameter of 5/64″ to 1-1/8″. In addition, forged socket set screw shaft collars come in 3/16 to 4 in. They are also available with special hardware for connection to shafts.
Set screw shaft collars are commonly used on transmission and machinery. A set screw allows you to secure the collar in position by setting it into the correct position with a grub screw or a set screw. The set screw can then be adjusted with a screw driver and is a quick and easy solution for keeping a shaft in place.

Aluminum shaft collars

Aluminum shaft collars offer a number of advantages, ranging from their light weight to their corrosion resistance. Aluminum shaft collars are available in various styles and sizes, and can be plated with a variety of finishes. They are also available in lightweight styles for applications with tight space constraints. The most important factor when selecting a shaft collar is the material used to make it. Aluminum is lighter than steel and has a high strength to weight ratio. The choice of material should also depend on how much corrosion resistance is required. For example, if the shaft will be exposed to extreme environments, it is a better choice to use treated steel.
Another benefit to aluminum shaft collars is their ability to be custom-matched to the shaft. This feature helps to increase their aesthetics and branding potential. In addition, the ability to color-code components and switches can improve safety. This is especially useful in fail-safe applications. By incorporating color-coded collars, manufacturers can increase the safety of their products.
Another advantage of aluminum shaft collars is their strength. For instance, they can withstand higher torque levels than other types of shaft collars. They can be easily adjusted, and their two-piece design makes them easy to replace. Moreover, CZPT keeps the two-piece collars together during manufacturing, ensuring a perfect fit for the shaft. These collars also feature forged steel socket screws for enhanced holding power and torque capacity.
Single-piece shaft collars are also available in various styles. The set screw type has a perpendicular outer face. The set screw in these collars is used to engage the mating shaft. This type of shaft collar is a good choice for rotating assemblies.

Stainless steel shaft collars

The main function of a stainless steel shaft collar is to provide clamping force to a rotating shaft. This is achieved by a variety of methods. One of these is by bending or hammering. A shaft collar can also be made of aluminum or a combination of both. These options provide different advantages, which are described in this article.
Stainless steel shaft collars are available in different sizes, shapes, and materials. The diameter of the shaft collar may range from five-sixteenths to two-and-a-half inches. Some manufacturers produce the collars in different materials, including T304, T316, 416, and 17-4PH. Their products may also come in various shapes, such as angles, flats, structural shapes, and threaded rods.
One of the most important advantages of a stainless steel shaft collar is its strength and durability. A well-made collar can prevent wear and tear and provide excellent holding power. It also has many applications and is useful in many industries. Its application ranges from vertical conveyors to horizontal athletic equipment machinery, from agriculture to retail.
While there are numerous types of shaft collars, all three types have some common characteristics. Typically, steel shaft collars have high holding power and slim to average profiles. Heavy-duty collars have twice the holding power of low-profile collars and are used in heavy-duty construction and mining. Ultra Heavy-Duty shaft collars have the highest axial holding power and are made of steel. Shaft collars may be treated with zinc for corrosion resistance.
One manufacturer offers stainless steel shaft collars made of 303 stainless steel and other materials. It offers collars of various diameters from three-eighth to one-eighth inch. They are available in threaded, mounting, and heavy-duty styles, and are suitable for a wide range of applications, including the aerospace, energy, and medical industries.

editor by czh 2023-01-17